How to quickly change car coolant

How to quickly change car coolant

Discover how to change your car's coolant quickly and easily, helping to protect your engine and maintain long-term vehicle performance. How to change the coolant in a car. This is a very important task, and car coolant is an essential component. So, what is car coolant? What is the importance of changing car coolant? This article will provide you with relevant information and instructions on how to quickly change your car's coolant at home.

What is automotive coolant?

Before changing your car's coolant, you need to understand what car coolant is. Car engines are typically in a confined space and generate a lot of heat during operation. This presented a challenge for engineers to invent a suitable cooling method for car engines. And that's how car coolant came about.

Nước mát ô tô là gì
What is automotive coolant?

Unlike other fluids, automotive coolant plays a crucial role in the engine cooling process. It keeps the engine at a stable temperature and prevents it from overheating.

If the engine overheats and there isn't enough coolant, some systems will automatically shut off the engine for safety. This helps prevent engine fires and stalling in older vehicles that lack temperature monitoring systems.

Car maintenance tips – quick coolant replacement

Changing your car's coolant at home isn't difficult. However, you need the right tools to avoid polluting the environment. Specifically, follow the steps below to change your car's coolant effectively and safely.

Step 1: Prepare all the necessary tools.

The first step in changing your car's coolant is to have all the necessary tools to ensure the process goes smoothly and easily.

  • The clean water tank has a capacity equal to half the cooling system's capacity.
  • Car coolant reservoir.
  • Screwdrivers with flat heads.
  • Funnel.
  • A basin/tub to hold the old coolant from a car.
  • Flashlight.
  • A pair of gloves.

Step 2: Drain the old coolant from the car.

The next step in changing the car's coolant is to flush the system. A word of caution: wait until the car has completely cooled down to avoid burns. Then, follow these steps:

  • Open the cap of the car's old coolant reservoir.
  • Locate the drain hole at the bottom of the tank by lifting the vehicle.
  • Open the drain and use a bucket/basin to collect the coolant from the old car.
  • Wait until all the coolant from the old car has drained out, then close the drain plug.

Step 3: Rinse the coolant reservoir.

When performing this step, you also need to proceed cautiously in the following order:

  • Pour clean water into the car's coolant reservoir.
  • Close the lid tightly to prevent spillage and air bubbles when the water boils.
  • Start the engine and let it idle for about 3-5 minutes.
  • Turn off the engine and wait for it to cool down.
  • Empty the water from the container as in step 2.

Step 4: Mix the new coolant solution for the car.

In this step, you need to mix the car coolant with purified or distilled water according to the manufacturer's instructions. Note that this only applies to coolants using organic acid technology.

However, when using BlueOne Coolant solution, you don't need to mix it with purified water.

Mixing car coolant
Mixing car coolant

Step 5: Pour the mixture into the container.

Pour the prepared automotive coolant mixture from the previous step into the main reservoir and the auxiliary reservoir.

Step 6: Monitor the engine.

Start the engine and let the car idle. During this time, you need to monitor until the temperature gauge starts to bubble and the coolant level begins to drop. Throughout this process, continuously monitor the temperature gauge to prevent the engine from overheating. If the temperature gauge rises close to the red mark, turn off the engine immediately and check if the coolant level in the reservoir is sufficient.

Step 7: Fill the bottle with the solution.

When the coolant level in your car is nearly empty, refill both the main and auxiliary coolant reservoirs. Then, close the caps and use as normal.

Step 8: Clean up and dispose of waste properly.

The final step in changing car coolant is to use a funnel to collect the old coolant into a reservoir and dispose of it properly. If the engine overheats during operation, add coolant to the expansion tank because air bubbles may still remain in the cooling system.

See More: What type of engine coolant is best?

Where can I buy coolant that is safe to use?

Currently, there are many businesses selling coolant. However, to ensure an effective coolant change for your car, you need to use a reputable, high-quality product. To do this, come to BlueOne.

Mua nước làm mát ô tô ở đâu
Where can I buy car coolant?

BlueOne® Coolant Engine Coolant This is a product of organic acid technology (OAT). The advantage of this technology is its ability to protect and prevent corrosion of metal materials (magnesium, aluminum, etc.) in new generation engines using organic acids and neutral azoles. This helps extend engine life, optimize performance, and save operating costs.

The product comes in various types, including G10, G30, and G50, to help you easily choose according to your needs. For more specific advice, please contact us using the information below: